App Logo

Download Our App

Shop your way

logologo
Image

Hijri date

11/04/2024By: ICN
Hijri date

the introduction

The concept of the Hijri calendar The Hijri calendar is the calendar system used by Muslims to determine dates. It is based on the moon's orbit around the Earth and consists of 12 months. This calendar begins with the year of the Prophet Muhammad's migration from Mecca to Medina, a great event in the history of Islam. The importance of the Hijri calendar The Hijri calendar holds great importance in the lives of Muslims. It is used to determine religious occasions such as Ramadan, Eid al-Fitr, and Eid al-Adha. It also helps Muslims organize their daily lives and social relationships. By understanding the Hijri calendar, new generations can better appreciate their history and culture.

Hijri calendar history

Key Events in the History of Hijra The Hijra of the Prophet is a pivotal event in the history of Islam. It was not limited to the migration of the Prophet Muhammad (PBUH) and his companions, but rather reflects the beginning of a new phase of the Islamic call. The migration was the starting point for the state of Medina, in which Muslims became a cohesive community, which enhances the importance of the Hijri calendar as a time standard. Development and changes in the Hijri calendar Over the centuries, the Hijri calendar has undergone several changes, as the sighting of the crescent moon was adopted to determine the beginning of the months. Some Islamic countries also contributed to its development by applying calculation methods, which helped in the accuracy of dates and better identification of holidays and occasions.

The religious significance of the Hijri date

Important religious events in the history of migration The Prophet's migration is considered one of the most important events in Islam, as it formed the cornerstone in building the Islamic community. Through this migration, Muslims were able to gather their forces and encourage the Islamic call, which led to the spread of Islam in various regions. The sacred months in the Hijri calendar The Hijri calendar is distinguished by the sacred months, which have a special value in the Islamic religion. These months, namely: Dhul-Qi'dah, Dhul-Hijjah, Muharram, and Rajab, are considered a sacred time that Muslims must respect, as fighting is prohibited and good deeds increase.

Hijri calendar and other calendars

Differences between the Hijri and Gregorian calendars The Hijri calendar consists of 12 months based on the lunar cycle, while the Gregorian calendar is based on the solar cycle. Therefore, the Hijri year is about 11 days shorter than the Gregorian year, which leads to discrepancies in the dates of events between the two calendars. Modern uses of the Hijri date Many Islamic countries use the Hijri date in official transactions, including determining religious occasions such as Ramadan and holidays. In addition, many Muslims show interest in commemorating historical occasions related to the Hijri date to educate new generations.

The impact of the Hijri calendar on Islamic civilization

Important events witnessed by Islamic civilization according to the Hijri calendar Islamic civilization witnessed many prominent events that were recorded according to the Hijri calendar, such as invasions and battles, in addition to the establishment of the Islamic state. These events were pivotal to the emergence of the Islamic nation and the development of its identity. The social and cultural structure of Islamic societies and its relationship to migration The Hijri history had a significant impact on the social and cultural structure of Islamic societies. The migration from Mecca to Medina contributed to shaping the values ​​of solidarity and cooperation, which helped build an interdependent society that strengthens the bonds between its members.

* All articles published on this blog are sourced from various websites and are provided for informational purposes only. They should not be considered as confirmed studies or accurate information. Please verify the information independently before relying on it.

Similar ARTICLES

Natural Ways to Get Rid of Centipedes
Natural Ways to Get Rid of Centipedes
Centipedes usually enter homes for two practical reasons: moisture and food. They prefer damp, shaded areas such as bathrooms, laundry rooms, basements, storage corners, and under sinks where humidity stays high and small insects gather. If you frequently see them at night, that is normal behavior because they hunt in the dark and avoid open, bright spaces. Their presence can also signal that other pests are available as prey, including ants, cockroaches, silverfish, and small flies. That means focusing only on killing the centipede you see may not solve the problem if the indoor environment still supports moisture and insect activity. A natural plan works best when it reduces humidity, removes hiding places, and blocks entry points so centipedes cannot keep returning. Before you start, note where you see them most often and what conditions exist there: leaking pipes, wet floor drains, stacked cardboard, clutter behind appliances, or gaps around doors. This quick observation helps you choose the simplest steps with the biggest impact.
Plant Care Checklist Before You Travel
Plant Care Checklist Before You Travel
A reliable travel plan starts with a quick audit, because “houseplants” do not behave as one group. Two days before you leave, walk through your home and sort plants into three buckets: thirsty (thin leaves, small pots, bright-window plants), moderate (most foliage plants in medium light), and drought-tolerant (succulents, cacti, thick-leaf varieties). This simple grouping prevents the most common mistake: giving every pot the same heavy watering right before departure. Check the container and soil, not only the leaves. Lift each pot; a light pot usually means the mix is dry, while a heavy pot may already be wet enough. Look for compacted soil that repels water; if water runs down the sides and out quickly, the root ball may be dry inside. Note which plants are in terracotta (they dry faster) versus plastic or glazed ceramic (they hold moisture longer). Finally, consider location: plants near air-conditioning vents, sunny glass, or heat sources will lose water faster than those in stable, indirect light.
Saying No Without Burning Bridges
Saying No Without Burning Bridges
Many people struggle to refuse requests because they confuse politeness with compliance. In everyday life, a request can carry hidden pressure: fear of disappointing someone, losing a connection, or being labeled unhelpful. This pressure increases when the requester is a manager, a close friend, or a family member. Another reason is unclear personal limits. If you have not defined what you can realistically give—time, money, energy—you will negotiate in the moment and often agree to things you later regret. A practical way to reduce this stress is to separate the person from the request. You can respect the person while declining the task. Also, remember that saying yes has a cost: it takes time from work, rest, or other commitments. When you treat your time as a limited resource, refusal becomes a normal decision rather than a personal conflict. The goal is not to win an argument; it is to communicate boundaries clearly while keeping the relationship functional.
Why Someone Stays on Your Mind
Why Someone Stays on Your Mind
When you can’t stop thinking about someone, it often has less to do with romance and more to do with how the brain handles incomplete stories. Unresolved conversations, unclear endings, or mixed signals create a mental “open loop.” Your attention keeps returning to the person because the mind is trying to organize what happened, predict what might happen next, and reduce uncertainty. This is why a brief interaction can sometimes feel louder than a long, stable connection. In daily life, open loops show up as replaying a last message, analyzing a tone of voice, or imagining alternative outcomes. The brain treats uncertainty as a problem to solve, so it keeps running scenarios. The more ambiguous the situation, the more mental bandwidth it can take. This pattern is common after sudden distance, a change in routine, or a relationship that ended without a clear explanation. A practical way to reduce the loop is to create your own closure. That can mean writing a short summary of what you know for sure, what you don’t know, and what you will stop trying to answer. It can also mean setting a boundary like “I won’t reread old chats after 9 p.m.” Closure is not always an external event; it can be a decision to stop feeding the uncertainty with repeated review.
Balcony Plants That Beat Harsh Summer Sun
Balcony Plants That Beat Harsh Summer Sun
Before buying any plant, treat your balcony like a small microclimate. Spend two days observing where the sun hits and for how long: early morning, mid-day, and late afternoon. Note the hottest corner, usually near reflective surfaces like light-colored walls, glass railings, or metal furniture. Also identify wind tunnels, because strong hot wind dries pots faster than sun alone. Measure your exposure in practical terms: “full sun” on a balcony often means 6–10 hours of direct light, but the intensity can be higher than a garden because of heat bouncing off tiles and concrete. If your balcony faces west or southwest, expect the harshest conditions. This matters because the plants in this guide are chosen not just for sunlight tolerance, but for their ability to keep looking good when the potting mix heats up. Finally, plan your containers. In extreme heat, pot choice is a survival tool. Use larger pots whenever possible, because more soil volume stays cooler and holds moisture longer. Light-colored pots reduce root-zone heat. Ensure drainage holes are clear, and add a saucer only if you can empty it quickly; standing water in heat can stress roots. With this setup, the five plants below can handle summer sun without constant rescue.
Clean Your Home AC the Right Way
Clean Your Home AC the Right Way
Home air conditioners collect dust, lint, and moisture, which can reduce airflow and make the unit work harder. The good news is that most routine cleaning is simple and safe if you focus on accessible parts: the front panel, air filters, supply vents, and the area around the indoor unit. These steps improve air movement and help the system maintain a steady temperature without long run times. Before you start, turn the unit off from the remote and the wall switch, and if possible cut power at the breaker for extra safety. Prepare a soft microfiber cloth, a small vacuum with a brush attachment, mild dish soap, a spray bottle of water, and a towel to protect the wall or floor. Avoid harsh cleaners, bleach, strong degreasers, and high-pressure water. They can damage plastic parts, coatings, and electronics. As a rule, you should not open sealed electrical compartments, remove fan motors, or wash the indoor coil with running water unless the manufacturer explicitly allows it. If you notice persistent water leaks, a burning smell, repeated tripping of the breaker, or the unit stops cooling despite clean filters, those are signs to call a qualified technician. Routine homeowner cleaning is about keeping airflow paths clear and surfaces free of dust, not dismantling the system.
Soft Archways for Calm 2026 Homes
Soft Archways for Calm 2026 Homes
In 2026, arches are returning as a practical design tool rather than a nostalgic detail. Homeowners are using curved openings to soften the hard geometry of open-plan layouts, especially where living, dining, and kitchen zones meet. The arch creates a clear threshold without adding doors or heavy partitions, which helps spaces feel organized while staying visually connected. This renewed interest is also tied to the wider shift toward “quiet comfort” interiors: fewer sharp lines, more tactile finishes, and shapes that feel easy on the eye. A well-proportioned arch naturally guides movement through the home and reduces the visual clutter that comes from multiple competing straight edges. Designers are pairing arches with calm palettes, layered lighting, and simple furniture silhouettes to keep the look modern rather than ornate.
Making Happiness a Reliable Habit
Making Happiness a Reliable Habit
Many people chase a permanent “high,” then feel disappointed when normal days return. A more realistic goal is stable well-being: a baseline that stays steady even when mood fluctuates. Lasting happiness is less about constant excitement and more about predictable recovery after stress, plus frequent moments of calm satisfaction. A practical way to start is to separate three layers: momentary pleasure (a good meal, a compliment), mood (how you feel across hours), and life satisfaction (how you evaluate your life over months). Pleasure is easy to increase but fades quickly. Life satisfaction changes slowly and depends on choices, routines, and relationships. When you aim for “lasting,” focus on the middle and long layers: daily mood stability and long-term satisfaction. This shift changes your strategy. Instead of asking, “How do I feel happy today?” ask, “What makes my average week better?” The answer is usually not a single event; it is a system: sleep, movement, social connection, meaningful work, and a way to handle setbacks without losing your footing.
When Cyberbullying Steals Your Calm
When Cyberbullying Steals Your Calm
Cyberbullying rarely arrives as one dramatic incident. More often, it shows up as a drip of small disruptions: a sarcastic reply under a photo, a private message that crosses a line, a meme that uses your name, or a group chat that suddenly goes silent when you join. Each moment can feel minor, yet the accumulation changes how you move through your day. You start checking your phone with caution, not curiosity. You reread posts before publishing, anticipating how they might be twisted. You hesitate to share opinions, photos, or even everyday updates. What makes this form of stress uniquely draining is its timing and reach. It can appear late at night, during work, or in the middle of a family gathering. The device that connects you to friends, news, and services becomes a channel for unpredictable negativity. That unpredictability is a direct hit to comfort: you cannot fully relax when you expect the next notification to carry a sting. Over time, this can reshape routines—sleep patterns, concentration, appetite, and motivation—without you immediately linking the change to online behavior. For many women and girls, the pressure is amplified by the expectation to stay “polite” online and to manage conflict quietly. That can lead to internalizing the problem and trying to solve it alone. The result is a private burden: you look fine in public, but your mind is busy scanning for threats, replaying comments, and planning how to avoid the next wave. Comfort is not only about safety; it is also about mental space. Cyberbullying occupies that space.
Parquet Care That Actually Lasts
Parquet Care That Actually Lasts
Reliable parquet care starts with identifying what you have, because the finish—not just the wood—determines what products and routines are safe. In most homes you will find either solid wood parquet, engineered parquet (a real-wood top layer over stable layers), or laminate that only imitates wood. The daily approach can look similar, but the tolerance for moisture, abrasion, and refinishing is very different. Next, check the surface finish. A polyurethane or factory-sealed finish is common and generally more resistant to spills, while oiled or waxed parquet needs gentler cleaning and periodic re-oiling. A quick practical test is visual: sealed floors tend to have a more uniform sheen, while oiled floors often look more matte and show “dry” areas in high-traffic zones. If you are unsure, avoid strong detergents and excessive water until you confirm. Finally, map the risk zones in your space. Entryways, kitchen edges, and areas near balconies receive the most grit and moisture. Furniture legs, rolling chairs, and pet bowls are typical damage points. By identifying these zones, you can focus protection where it matters instead of over-cleaning the entire floor, which often causes more wear than normal use.
Cotton Ball Scent Hacks at Home
Cotton Ball Scent Hacks at Home
Cotton balls are small, porous, and designed to absorb liquids evenly, which makes them a practical carrier for fragrance. A few drops of essential oil, fabric-safe perfume, or a diluted scent blend can sit inside the fibers and release gradually over hours or days. Unlike spraying fragrance directly into the air, cotton helps control intensity and reduces waste because the scent stays where you place it. They also fit into tight spots where other fresheners are bulky: drawers, shoe cabinets, car cup holders, bathroom corners, and storage bins. Because cotton is inexpensive and widely available, you can refresh multiple areas at once without buying separate products. The key is using the right amount of fragrance and keeping cotton away from direct contact with delicate fabrics, unfinished wood, or painted surfaces that could stain. For best results, treat cotton balls like a “scent capsule.” Add fragrance in small increments, let it absorb for a minute, then place it in a breathable holder such as a small mesh bag, a perforated container, or a tissue wrap. This keeps the cotton tidy, prevents oil transfer, and makes replacement easy. If you have pets or small children, place cotton balls out of reach and avoid strong oils that can be irritating in enclosed spaces.
Paraffin Wax Home Hacks That Save Money
Paraffin Wax Home Hacks That Save Money
Paraffin wax is a refined wax commonly sold as blocks, pellets, or flakes. At home it is useful because it melts at relatively low temperatures, spreads into a thin protective layer, and hardens quickly. For household use, choose plain, unscented paraffin without added dyes, especially if you plan to apply it to items that touch skin or food packaging. A small amount goes a long way, so one block can last for months. Safety matters because melted wax can overheat. Melt it using a double boiler setup: place wax in a heat-safe container set inside a pot of simmering water, and keep the heat low. Avoid direct flame or high heat, and never leave melting wax unattended. Work on a protected surface, keep a cloth nearby for drips, and let wax cool slightly before applying with a brush or cloth. Store leftover wax in a labeled container so it stays clean and ready for the next quick fix.
Turning Long Free Hours Into Creative Energy
Turning Long Free Hours Into Creative Energy
Long stretches of free time often feel like a blank space that must be “filled,” which can trigger scrolling, snacking, or random errands. A more useful approach is to treat free hours as a resource with a purpose: recovery, exploration, or production. Start by naming the role of today’s free time in one sentence, such as “I will use two hours to explore ideas” or “I will use this evening to finish one small output.” This simple framing reduces decision fatigue and makes it easier to choose actions that build momentum. Next, separate creative time from leisure time instead of mixing them. Leisure is valuable, but when it is the default response to boredom, it can consume the entire window. Try a clear split like 60 minutes for creative work, then 30 minutes for leisure, repeated once or twice. The goal is not strict discipline; it is to prevent the day from dissolving into low-intensity activities that do not leave you satisfied. Finally, define what “creative” means for you in practical terms. Creativity is not limited to art. It can be improving a recipe, designing a personal budget template, reorganizing a workspace, writing a short article, or learning a new tool. When creativity is defined as “making something slightly better or more original,” it becomes accessible during ordinary days, not only during rare bursts of inspiration.
By clicking the SUBSCRIBE button, you are agreeing to our Privacy & Cookie Policy If you want to unsubsribe the marketing email, please proceed to our privacy center.
© 2005-2026 ICN. All Rights Reserved.