Kingston 8GB Note Book RAM PC4-3200 CL22 260-Pin SODIMM Kingston 8GB DDR4 3200/Notebook [ KVR32S22S6/8 ] DESCRIPTION This document describes ValueRAM’s KVR32S22S6/8 as a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: SPECIFICATIONS CL(IDD) 22 cycles Row Cycle Time (tRCmin) 45.75ns(min.) Refresh to Active/Refresh // Command Time (tRFCmin) 350ns(min.) Row Active Time (tRASmin) 32ns(min.) UL Rating 94 V – 0 Operating Temperature 0o C to +85o C Storage Temperature -55o C to +100o C FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP = 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Single-rank On-board I2 serial presence-detect (SPD) EEPROM 8 internal banks; 2 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology Terminated control command and address bus PCB: Height 1.18” (30.00mm) RoHS Compliant and Halogen-Free