Kingston 4GB/1600MHz DDR3 Notebook Kingston 4GB 1600MHz DDR3/Notebook  KVR16S11S8/4 One 4GB module of 1600MHz DDR3 Notebook Memory DESCRIPTION ValueRAM’s KVR16S11S8/4 is a 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURES JEDEC 1.5V Power Supply VDDQ = 1.5V 800MHz fCK for 1600Mb/sec/pin 8 independent internal banks Programmable CAS latency: 11, 10, 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL – 2, or CL – 1 clock 8-bit pre-fetch Burst Length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS) Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº Asynchronous Reset PCB: Height 1.180” (30.00mm), double sided component SPECIFICATIONS CL(IDD) 11 cycles Row Cycle Time (tRCmin) 48.125ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) 260ns(min.) Row Active Time (tRASmin) 35ns(min.) UL Rating 94 V – 0 Operating Temperature 0 o C to +85 o C Storage Temperature -55 o C to +100 o C for more information about Kingston 4GB 1600MHz DDR3/Notebook visit offcial website of Kingston . Click Here for more kingston products Click Here