Kingston 8GB 3200MT/s DDR4 Kingston ValueRam 8GB 3200MT/s DDR4 Memory RAM KVR32N22S6/8 More about Kingston 8GB 3200MT/s KVR32N22S6/8 DESCRIPTION SPECIFICATIONS 8GB 1Rx16 1G x 64-Bit PC4-3200 CL22 288-Pin DIMM FEATURES This document describes ValueRAM’s KVR32N22S6/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh Command Time (tRFCmin) Row Active Time (tRASmin) UL Rating Operating Temperature Storage Temperature 22 cycles 45.75ns (min.) 350ns (min.) 32ns (min.) 94 V – 0 0o C to +85o C -55o C to +100o C Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP = 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low – power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On – die VREFDQ generation and calibration Single-rank On-board I2 serial presence-detect (SPD) EEPROM 8 internal banks; 2 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology Terminated control command and address bus PCB: Height 1.23” (31.25mm) RoHS Compliant and Halogen-Free MODULE DIMENSIONS All measurements are in millimeters. (Tolerances on all dimensions are ±0.12 unless otherwise specified) The product images shown are for illustration purposes only and may not be an exact representation of the product. Kingston reserves the right to change any information at anytime without notice. For more information about this product visit official website of Kingstone Kingston For more related products visit us at our website PC Circle