Kingston Value RAM 4GB 1600MHz PC3-12800 DDR3 Non-ECC CL11 DIMM SR x8 Desktop Memory Kingston 4GB 1600MHz/Desktop [ KVR16N11S8/4 ] 4GB module of 1600MHz DDR3 Desktop RAM DESCRIPTION This document describes ValueRAM’s 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers FEATURES JEDEC standard 1.5V Power Supply VDDQ = 1.5V 800MHz fCK for 1600Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL – 2, or CL – 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB : Height 0.740” (18.75mm) or 1.180” (30.00mm) for more information about Kingston 4GB 1600MHz/Desktop visit official website of Kingston . Click Here for more Kingston Products visit Us at Our Website : PC Circle