ARCTIC P12 PWM PST A-RGB FAN With Cable Splitter 120 mm A-RGB PWM Fan with Cable Splitter Fan Speed 200—2000 rpm PWM Controlled (0 rpm below 5% PWM) Fan Bearing Fluid Dynamic Bearing LEDs 12 A-RGB LEDs For More Information Click Here ARCTIC P12 PWM PST A-RGB FAN With Cable Splitter Addressable RGB for Full Colour Control The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. Optimised for High Static Pressure The P12 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is, therefore, suitable for use on heat sinks, radiators, and filters. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Maximum Smoothness, Minimum Vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum. High-Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated, and the service life of the fan is extended. 200 to 2000 rpm Controlled via PWM PST With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance. For Professional GAMING LAPTOPS Show More